Water Closet Sanitary Testing
CALC has been enlisted with the IAPMO India(International Association of Plumbing and Mechanical Officials) for Product Certification of Plumbing & WC (Water Closet) Sanitary Wares as per the requisite standard’s requirements. The test facility covers different WC & Sanitary-ware products including sub-assemblies/units/plumbings namely Vitreous Sanitary Appliances (Vitreous China) – (WC Pans, Bidet, Squatting pans, Urinals, partition plates, pedestals, short pedestals, wash basins, Laboratory sinks, drinking fountains, flushing cistern and covers) IS 2556 P1-15, Ceramic Plumbing Fixtures ASME A11.2:19.2:2008/CSA B-45.1-08.
Test Parameter of IS:2556 P1-15 & ASME A-11.2:19.2:08/CSA B-45.1-08*
- Application of glazing
- Blemish/Defects: Wavy Finish: Discolouration: Spots: Blisters & Pin hole: Bubbles & Specks: Visible surface other than above:Polishing marks: Minimum thickness at any point
- Chem. resistance& Resistance to stains & burns
- Construction & Dimensions
- Dye test Cleavability & Finish
- Field installed flange test & Overflow test
- Holding capacity test & Ball test Granule & ball
- Joint seal test & Auger test
- Load bearing capacity Structural integrity test
- Mixed media Drain line turnspit characterization
- Saw Dust test
- Splash test*
- Toilet Paper test & Smudge test
- Trap seal Depth determination & restoration
- War page & Crazing
- Water absorption & Modulus of rupture
- Water consumption & Surface wash test
|